25
2025
02
Precautions for Commissioning Electric Actuators—Key Steps to Ensure Stable System Operation

As a core component of automated control systems, electric actuators are widely used in industries such as petroleum, chemical processing, power generation, metallurgy, and water supply, where they perform the regulation and control of parameters like flow rate, temperature, and pressure. Their operational performance directly affects the stability and efficiency of the entire control system; therefore, commissioning of electric actuators is of paramount importance. Improper commissioning can lead to unstable equipment operation, potentially causing malfunctions that disrupt production schedules and increase maintenance costs.
This article will outline the key considerations to keep in mind during the commissioning of electric actuators, ensuring their efficient and reliable operation.
1. Understand the basic principles of electric actuators.
Before commissioning an electric actuator, it is essential to first understand its operating principle. An electric actuator typically consists of an electric motor, a gearbox, an output mechanism, and a control system. The electric motor provides the driving force, the gearbox reduces the rotational speed, and the output mechanism performs the corresponding motion in response to the control signal. The control system receives input signals, adjusts the actuator’s operating state, and achieves precise regulation of parameters such as flow rate, temperature, and pressure.
Before commissioning, operators must be familiar with the components and functions of the actuator and understand how it interfaces with the higher-level control system. Different types of actuators employ distinct control modes: some use discrete on/off control, while others utilize analog regulation. Recognizing these differences enables operators to perform commissioning more precisely.
2. Inspect the installation of the actuator.
Prior to commissioning, the installation of the electric actuator must be inspected. Ensure that the equipment is installed in accordance with the design specifications, that the actuator’s mounting location is appropriate, and that all connecting components are securely fastened.
Power Connection: Verify that the electric actuator’s power connection complies with relevant standards, that the supply voltage is stable, and that proper grounding is in place, to prevent equipment from failing to start due to power‑related issues.
Mechanical Installation: The connection between the actuator’s output and the valve or other control equipment shall be secure and free of looseness to prevent mechanical failures that could compromise normal equipment operation.
Sensor Installation: If the actuator is equipped with sensors (such as position sensors, pressure sensors, etc.), ensure that the sensors are properly installed and correctly connected to the control system to prevent inaccurate sensor signals.
3. Ensure the accuracy of control signals
The control accuracy of an electric actuator depends on the reliable transmission of control signals. During commissioning, it is essential to ensure that the control signals issued by the supervisory control system match those received by the actuator, with stable signal transmission free from interference. Common control signals include analog signals (4–20 mA) and discrete signals (ON/OFF). When using analog signals, verify their stability and confirm that the transmission lines are undamaged.
4. No-load test during initial commissioning
When initially commissioning an actuator, it is recommended to perform a no‑load test. This test helps verify that the actuator operates correctly and identifies any potential installation or electrical issues. By conducting a no‑load test, you can confirm that the electric actuator moves in accordance with its set parameters when operating under unloaded conditions.
During no-load testing, the control system shall sequentially apply various control signals, observe the actuator’s response, and record the response time and positioning accuracy. Special attention should be paid to whether the actuator can complete its full stroke without difficulty and whether any sticking or jamming occurs.
5. Debugging Under Load
After completing the no-load test, the next step is to perform commissioning under load. Load testing better reflects the actuator’s performance under actual operating conditions. During commissioning, the real‑world working environment should be simulated, with realistic operational loads applied, to evaluate the actuator’s response across a range of load conditions.
The debugging tasks under load include:
Motion smoothness: Observe whether the actuator operates smoothly under load, and check for any severe vibrations or jerking.
Adjustment accuracy: Verify whether the actuator can precisely regulate the set parameters and whether overshoot or hysteresis occurs.
Temperature Rise: Monitor the temperature changes of the actuator during load operation to prevent overheating and potential equipment damage.
6. Set appropriate limit protection.
When commissioning an electric actuator, special attention should be paid to the configuration of limit‑position protection. This protection prevents damage to the actuator caused by overtravel or operator error. Electric actuators typically incorporate two limit switches—one for the positive limit and one for the negative limit—corresponding respectively to the actuator’s maximum and minimum travel positions.
During commissioning, the operating status of the limit switches should be checked to ensure that they promptly cut off power or stop the drive when the actuator reaches its extreme positions, thereby preventing mechanical damage caused by excessively long or short strokes.
7. Coordination with the host control system during debugging
Electric actuators typically communicate with the higher-level control system, and during commissioning, effective coordination with the control system is essential. It is crucial to ensure that the actuator’s response time and stroke match the requirements of the control system. For example, in PID control, the tuning parameters must be appropriately matched to the actuator’s performance to prevent the system from becoming overly sluggish or excessively overshooting.
By coordinating with the control system, commissioning personnel can ensure that the actuator’s accuracy and response speed meet design specifications, thereby preventing performance fluctuations caused by mismatched control‑system parameters after commissioning.
Summary
Commissioning of electric actuators is a critical step in ensuring their reliable and efficient operation. During this process, operators must meticulously verify the equipment’s installation, signal transmission, and load‑bearing performance to guarantee system stability. Commissioning goes beyond a simple equipment startup; it constitutes a comprehensive test and optimization of the entire control system. By employing scientifically sound commissioning procedures, the actuator’s operational efficiency can be maximized, ensuring long‑term, stable performance.
Electric actuator, actuator commissioning, industrial automation, control system, equipment performance