13

2025

10

Thermal Company’s DN1400 Manual Valve Revamped: SopaiShi Electric Actuators Solve Challenges in Safety and Efficiency


Thermal Company’s DN1400 Manual Valve Revamped: SopaiShi Electric Actuators Solve Challenges of Safety and Efficiency

In the field of district heating network operations and maintenance, operating DN1400 manual valves has long been a major industry challenge: frequent underground inspections pose hidden safety risks, and manually turning the valve with multiple workers can take over six hours per operation, severely compromising heating‑supply reliability. Drawing on its expertise in electric actuators and actuation systems, Soupaishi has delivered a seamless solution to this problem—enabling the intelligent upgrade of DN1400 manual valves while setting a new record for split‑type installation at 180 meters, thereby redefining standards for thermal‑valve O&M.
I. Pain points in the operation and maintenance of heating networks are becoming increasingly apparent, making the retrofitting of manual valves an urgent priority.
For heating companies, the DN1400 manual valve, as a critical control component of the pipeline network, has operational efficiency and safety that directly impact the stable operation of the heating system. However, the conventional manual operating mode presents two major core issues:
High personnel safety risks: DN1400 valves are often installed in underground manholes, where the subterranean environment is complex and fraught with hazards such as oxygen deficiency, standing water, and harmful gases. Maintenance personnel must frequently descend into these wells to operate the valves, which not only entails heavy physical labor but also exposes them to risks like falls and poisoning. Ensuring worker safety has thus become a top priority for heating utilities.
Operational efficiency is extremely low: Due to the large diameter of the DN1400 valve and its high torque requirements, manual opening and closing necessitate multi‑person coordination and hand‑cranking, with a single complete cycle taking more than six hours. During peak heating seasons or emergency repair situations, such lengthy operation times can lead to untimely pipeline network adjustments, compromising residential heating quality and even causing pressure imbalances in the system.
These pain points are driving heating companies to pursue technological upgrades, and the installation of electric actuators—also known as electric actuating mechanisms—has emerged as a key solution to the challenges of maintaining and operating manual valves.

II. Soupai Shi Electric Actuators: Specifically Addressing the Core Requirements of DN1400 Valve Retrofitting
As a specialized brand in the industrial automation sector, Soupaishi has been deeply engaged in the R&D and manufacturing of electric actuators and electric actuation systems for many years. In response to the thermal utility company’s need to retrofit a DN1400 manual valve, it delivered a customized solution that delivers breakthroughs across two key dimensions: safety and efficiency.
1. Say goodbye to frequent underground operations and strengthen the safety safeguards for personnel.
The Soupai‑Shi electric actuator features a split‑type design, separating the actuator body from the control unit; the control unit can be mounted in a ground‑level control cabinet or on a remote operating platform. This eliminates the need for thermal‑system maintenance personnel to descend into wells frequently—valve opening and closing can now be performed via floor‑mounted pushbuttons or a remote control system, effectively eliminating safety risks associated with underground operations. In addition, the Soupai‑Shi electric actuator is equipped with comprehensive safety protection functions, including torque‑limit protection, overload protection, and phase‑loss protection. Should an abnormality occur during valve operation, the device will automatically shut down and issue an alarm, further ensuring operational safety and pipeline network stability.

 Soupai Electric Actuator


2. Efficiency Soars 23-Fold! Completing Six Hours’ Worth of Work in Half an Hour
Compared with the time‑consuming six‑hour manual process, the SoupaiShi electric actuator, thanks to its powerful drive performance and precise control technology, can complete a full opening and closing cycle of a DN1400 valve in just half an hour—boosting efficiency by more than 23 times. This breakthrough not only significantly reduces labor costs—tasks that once required 3–5 workers can now be handled by a single operator via remote control—but also enables rapid response in emergency situations. For example, during urgent repairs to heating networks, swiftly opening or closing valves helps minimize service interruptions, reduce resident complaints, and enhance the thermal utility’s reputation for reliability and customer service.

 Soupai Electric Actuator


3. Sets a 180-meter split‑type record, suitable for complex installation scenarios.
In practical retrofit projects, the distance between DN1400 valve manholes and ground-level control points often varies; in some cases, this separation exceeds 100 meters, placing stringent demands on the remote‑control range of electric actuators. By optimizing the signal‑transmission technology and power‑supply configuration of its electric actuation system, Soupaishi has successfully achieved split‑mount installation at an unprecedented distance of 180 meters, surpassing the conventional limits for actuator separation. This record not only underscores the technological prowess of Soupaishi’s electric actuators but also ensures compatibility with complex installation scenarios—such as widely dispersed manholes and extended distances—common in district heating networks, offering flexible retrofit solutions for heating utilities of varying scales.

 Sopai Electric Actuator


III. Core Advantages of Soupai’s Electric Actuators: Why Have They Become the Preferred Choice in the Heating Industry?
In addition to specifically addressing the renovation requirements of DN1400 valves, Soupai’s electric actuators (electric actuation mechanisms) boast three key advantages, making them the preferred choice in the heating industry:
    High compatibility The Soupai electric actuator supports multiple valve interface specifications and is compatible with gate valves, butterfly valves, and ball valves of various nominal diameters, ranging from DN50 to DN2000. This eliminates the need for extensive modifications to existing valves, thereby reducing both the renovation costs and construction timelines for heating companies.
    Stable and durable : In response to the high‑temperature, high‑humidity, and highly corrosive operating conditions of district heating networks, Soupaishi electric actuators are designed with an IP67 protection rating, and their core components are made from alloy materials that resist both extreme temperatures and corrosion. This ensures long‑term, stable operation in harsh environments ranging from –30°C to 80°C, thereby reducing the frequency of subsequent maintenance.
Intelligent compatibility The Soupai‑Shi electric actuator supports mainstream communication protocols such as Modbus and RS‑485, enabling seamless integration with district heating companies’ SCADA systems or smart O&M platforms. This facilitates real-time monitoring of valve operating status, data acquisition, and remote control, helping heating utilities build an intelligent pipeline‑network operation and maintenance system.

IV. Selecting a Search-and-Dispatch Service Provider: Ushering in a New Era of Intelligent Operations and Maintenance for Thermal Valves
For heating companies, retrofitting DN1400 manual valves with electric actuators represents not only an upgrade of equipment but also a transformation of operations and maintenance practices—shifting from “labor-intensive, high-risk, low-efficiency” to “automated, safe, and highly efficient.” As a specialized brand in the field of electric actuators and actuation systems, Soupaishi has become a trusted partner to numerous heating companies, thanks to its customized solutions, technological breakthroughs, and reliable quality.
In the future, Soupaishi will continue to deepen its R&D in electric actuator technology, developing more tailored products and services to meet the specific needs of industries such as heating, power, and water treatment, thereby supporting the industrial sector in achieving automation upgrades and safe, efficient operations. If your company is grappling with the challenges of manual valve maintenance, consider choosing Soupaishi electric actuators—let technology address your pain points and usher in a new era of intelligent operations and maintenance.

Electric actuator, heating company, search engineer, electric actuating mechanism, manual valve