24

2020

07

Site photo of a split-type installation at a chemical plant in Jiangxi Province.


2SA5 variable-frequency / split installation 2SA5511-5CD0- 2SA5521-5CD0- 2SA5531-5CE0- 2SA5543-5CE0- 2SA5053-5CE0-

7878 Split installation: When on-site installation space is insufficient, ambient temperatures are excessively high, vibration levels are too severe, or the installation site is inconvenient for commissioning, it is possible to…

The intelligent control unit (electronic housing) and the mechanical components are installed separately. This approach resolves the aforementioned issues without compromising the actuator’s performance in the slightest. Product model: 2SA5... Multi-turn electric actuators represent the most fundamental type of actuator. Both linear‑stroke and angular‑stroke actuators are assembled by integrating multi‑turn actuators with additional mechanical components. The primary technical parameters of a multi‑turn actuator are its closing torque (Nm) and output shaft speed. There are six basic models of the SURPASS 5 PROFITRON multi‑turn actuator, with torque ratings ranging from 10 Nm to 1000 Nm. For multi‑turn actuators with a closing torque exceeding 1000 Nm, the unit is configured by combining lower‑torque multi‑turn actuators with a GK (or GST) reduction gearbox. The SURPASS 5 PROFITRON multi‑turn actuator can be equipped with a variety of internationally standardized mechanical interfaces—both on the output shaft and on the flange—enabling proper mechanical coupling with a wide range of controlled devices. Its flanges and output shafts comply with the international standards DIN ISO 5210 or DIN 3210.