10

2020

09

Soupai Shi Automation Technology Co., Ltd. has been invited to attend the 2020 Biomass Power Generation Enterprises’ Production Technology Exchange Conference, held from July 22 to 24 (Booth No. C2). We warmly welcome both new and longstanding friends to join us in Hangzhou.


Soupai Shi Automation Technology Co., Ltd. was invited to attend the 2020 Biomass Power Generation Enterprises’ Production Technology Exchange Conference.

(Booth No. C2) We cordially invite old and new friends to join us in Hangzhou.

 

 

Soupai Shi Automation Technology Co., Ltd.

Sopai Shi Automation Technology Co., Ltd. is a national high-tech enterprise specializing in the research and development, manufacturing, sales, and after-sales service of electric actuators. The company has consistently leveraged variable-frequency drive technology as its foundation, striving to produce the world’s most reliable electric actuators. It is committed to providing customers with electric actuators that deliver precise control, energy efficiency, and robust safety and reliability.

Founded in 1995, the company boasts over 20 years of experience in the research, development, and manufacturing of actuator systems. Headquartered in the New District of the Jinpan Development Zone in Jinhua, Zhejiang Province, the company maintains branch offices in Shanghai, Shenyang, Nanning, and Inner Mongolia. Equipped with high-precision machining centers, CNC lathes, and state-of-the-art testing equipment, our automated production facilities enable an annual output capacity of 100,000 electric actuators and 50,000 electric control valves, while also allowing us to swiftly customize non-standard products to meet specific customer requirements. All our products have successfully passed product and explosion-proof certifications issued by the National Industrial Automation Instrumentation Product Testing Center. With assured quality and stable, reliable performance, our products are widely deployed across industries including power generation, cement, petrochemicals, steel, water treatment, and food processing.

SURPASS is a registered trademark of our company and enjoys considerable recognition in the electric actuator market, having been awarded the title of “Well‑Known Trademark” at the city level. The SURPASS series of intelligent electric actuators has been extensively deployed across five major power plants—Zhejiang Energy, Datang, Huadian, Guodian, and Huaneng—as well as in large state‑owned enterprises such as PetroChina and China Aluminum Corporation, and is highly favored by leading valve manufacturers.

The company’s flagship product—the 2SA series variable-frequency electric actuators—employs vector‑control and fuzzy‑logic control technologies, features a built-in inverter, delivers high efficiency and energy savings, offers precise control, exhibits strong anti‑interference performance, incorporates robust self‑diagnostic fault‑detection capabilities, supports a wide range of torque settings, and enables variable‑speed operation for smooth valve actuation. As one of the earliest domestic manufacturers to develop and produce variable‑frequency electric actuators, the company holds a leading share of the Chinese market for such products. This product is protected by multiple patents and software copyrights, representing a high‑tech solution with independent intellectual property rights that can serve as a viable alternative to imported variable‑frequency electric actuators.

The company consistently adheres to a business philosophy that prioritizes market demand, leverages technological innovation as its driving force, upholds quality as its foundation, commits to integrity in service, and seeks to maximize customer value. As a result, it has earned the trust and support of numerous domestic and international customers.

National toll-free hotline: 4007066090, Website: www.surpasschina.cn

I. Meeting Time

July 22–24, 2020 (full-day registration on the 22nd; full-day sessions on the 23rd and morning sessions on the 24th; afternoon visit to Jiaxing Xinjia’aisi Combined Heat and Power Co., Ltd. on the 24th)

II. Meeting Venue

Zhejiang Province, Hangzhou City (specific venue to be announced separately)

III. Agenda Items

    • Analysis of the Development Prospects and Economic Incentive Policies for Biomass Power Generation

    • How Can Agricultural and Forestry Biomass Power Generation Enterprises Strengthen Operational Management and Project Development in the New Context?

    • Profitability Analysis of Biomass Power Plants

    • Biomass Power Plant Operating Cost Control

    • Sharing Experiences in Enhancing the Utilization Rate of Yellow Stems

    • Sharing of Experience in Optimizing and Adjusting Combustion in Circulating Fluidized Bed Boilers

    • Sharing of Operational Experience from Zhejiang Hengxin Power

    • Sharing Operational Experience of a 40 MW Stand-Alone Biomass Power Generation Unit

    • Sharing of Yongneng Co., Ltd.’s Experience in Fuel Procurement, Storage, and Transportation Management

    • Ultra-low Emissions and Combustion Optimization in Biomass Circulating Fluidized Bed Boilers

    • Technical Exchange on Dust Control and Odor Prevention in Biomass Power Plants

    • Energy-Saving Technology Exchange on Biomass Power Generation

    • Sharing and Exchange of New Technologies for Desulfurization, Denitrification, and Dust Removal

    • Sharing and Exchange on New Technologies for Fuel Crushing and Feeding Systems

    • Other New Technology Exchanges

IV. Outline of Selected Topics

(1) Analysis of the Development Trends and Economic Incentive Policies for Biomass Power Generation

 

The conference will feature exchanges on the domestic foundations and current landscape of renewable energy and biomass power generation; national energy and electricity transition goals and progress; changes in national subsidy, pricing, and project‑management policies for biomass power since 2020, along with corresponding interpretations; an analysis of revenue and expenditure related to subsidy funds for renewable‑energy power projects and their annual disbursement; the implementation of mechanisms to ensure the consumption of renewable‑energy electricity; and medium‑ and short‑term national development targets and policy frameworks for new energy.

(II) Ultra-Low Emissions and Optimized Combustion in Biomass Circulating Fluidized Bed Boilers

 

1. Company Profile

2. Ultra-low Emission Retrofit Technology for Biomass Circulating Fluidized Bed Boilers

3. Optimization and Retrofit of the Denitrification System for Biomass Circulating Fluidized Bed Boilers

(1) Optimization of the denitrification catalyst structure (2) Optimization of the denitrification filter structure (3) Precision ammonia injection system

4. Optimization and combustion retrofit of biomass circulating fluidized-bed boilers

(1) Tail-end heat exchanger (2) Furnace slag removal optimization (3) Conveying system optimization

5. Technology Outlook

(III) How Biomass Power Generation Enterprises in the Agricultural and Forestry Sectors Can Enhance Operational Management and Project Development under the New Context

 

1. The industry’s development trajectory has shifted.

(1) The industry has recently benefited from numerous favorable factors, and its growth trajectory is poised for a turnaround.

Since the beginning of this year, the government has successively introduced a series of favorable policies that support industry development, which will gradually improve the business environment and help the sector emerge from its downturn, ushering in a new phase of growth. However, to date, certain uncertainties remain in industry policy, and companies continue to face numerous challenges.

(2) The industry will ultimately improve.

Biomass power generation is undergoing an unprecedented transformation in more than a decade, driven by shifts in industry policies, corporate structures, and the operating environment. The North China and Northeast regions will be key determinants of this sweeping change. The sector is poised to see the emergence of model enterprises that excel across technological innovation, standardized management, and the “three major benefits”—a benchmark that currently remains absent—thereby setting a powerful example for the industry. Following a final round of comprehensive restructuring and consolidation, the industry will ultimately settle into a landscape dominated by three pillars: large private firms, state-owned enterprises (including central SOEs), and mixed‑ownership companies (in which SOEs or central SOEs hold strategic stakes). This new configuration will also catalyze transformative changes across biomass‑power equipment, related infrastructure, and the supply chain for biomass fuels. Over the next five to eight years, the biomass power sector is expected to achieve a decisive competitive edge over coal‑fired, wind, and solar photovoltaic power.

2. Ensure the sharing of experience in the long-term operation of fluidized-bed boilers.

(1) Operational Control

(2) Equipment Maintenance and Technological Upgrades

(3) Fuel impurity removal and blending

(4) Establishment of the “Two Systems”

3. Key Control Points for New Projects

As favorable policies become increasingly clear, a number of projects that have been approved but remain unbuilt, as well as those that were previously halted due to funding constraints, are bound to resume construction.

(1) Unit Selection and Design

(2) Project Cost Control

(3) Installation Node Control

(4) Individual unit and full-unit commissioning, as well as grid connection and power generation.

(4) Parallel advancement of informationization and management improvement to drive rapid enterprise growth — Sharing operational experience from Zhejiang Hengxin Electric Power Co., Ltd.

Zhejiang Hengxin Power Co., Ltd. is located at No. 12 Beidou Avenue, Longyou Economic Development Zone, Zhejiang Province. The company currently operates a 60 t/h high‑temperature, high‑pressure biomass water‑cooled vibrating grate boiler, coupled with a 15 MW extraction‑condensing steam turbine generator unit. It is Zhejiang Province’s first biomass combined heat and power project and a key provincial initiative. The enterprise’s rapid growth has been underpinned by the advancement of information technology and the enhancement of its management capabilities, which are reflected primarily in the following areas:

(1) It is the information-based control of raw material supply and management, ensuring from the source that incoming materials are of high quality, low in moisture, and cost‑effective, with an average feed‑to‑steam ratio as high as 4.8—winning at the very outset.

(2) Accelerate the development of smart power plants, with a focus on refined equipment management, ensuring that the majority of plant‑wide equipment remains under controllable conditions. This has significantly reduced equipment failure rates, extended equipment uptime and unit operating hours, resulting in an annual continuous operating time of 8,611 hours per unit.

(3) Optimize equipment selection and configuration to enhance equipment efficiency and reduce energy consumption; steam‑to‑electricity consumption is as low as 16 kWh per ton, and the plant’s overall power‑consumption rate is reduced to 8.8%. Under all operating conditions, the turbine’s steam‑specific consumption curve closely matches the manufacturer’s published data, while the boiler load factor reaches 98.66%.

(4) Improve institutional management by implementing a dual system of rewards and penalties to ensure efficient execution; launch energy-saving and efficiency‑enhancing initiatives, solicit diverse input, fully motivate employees, and leverage their professional expertise.

(5) Sharing of Experience in Controlling Operating Costs at Biomass Power Plants

 

The primary objective of business operations is profitability. However, in the current landscape of the biomass power generation industry, many companies, due to poor management, not only fail to turn a profit but also face losses. At the invitation of the Biomass Power Generation Association, I will share, from three perspectives, our company’s experience over the past few years in implementing refined cost‑management and operational control.

1. Fuel cost management;

2. Production operations and equipment cost management;

3. Human Resource Cost Management.

Operational cost control can be summarized in six key points:

First: Fuel control is critical.

Second: The inspection system is a guarantee.

Third: Condition monitoring is the foundation.

Fourth: Prolonging lifespan is the essence.

Fifth: Equipment reliability is fundamental.

Sixth: Optimized management is the ultimate goal.

(6) Application of Dust-Removal Technology in Biomass Power Plants Utilizing Agricultural and Forestry Waste

During the 13th Five-Year Plan period, the state vigorously promoted the development of biomass cogeneration and clean biomass heating projects. Both the 2017 notice issued by the National Energy Administration, “Guiding Opinions on Promoting the Development of Biomass Heating,” and the end-2019 notice calling for reporting on the status of clean biomass heating stipulated that biomass boiler flue gas emissions must meet the emission standards of gas-fired boilers. In recent years, ultra‑low‑emission and even near‑zero‑emission technologies for biomass cogeneration and clean heating have gradually been incorporated into local environmental protection requirements, with a growing consensus emerging. At present, China lacks industry‑specific flue gas emission standards for biomass power generation from agricultural and forestry residues; the local standards adopted in many regions are based on those for thermal power generation or for industrial boilers with capacities below 65 t/h.

Under the latest national standard for atmospheric pollutant emissions from thermal power plants, GB 13223-2011, the emission limit for particulate matter from gas-fired boilers is 5 mg/m³. Meanwhile, the most recent boiler air pollutant emission standard, GB 13271-2014, sets the emission limit for particulate matter from gas-fired boilers at 20 mg/m³.

At present, direct combustion of agricultural and forestry waste for power (and heat) generation in China mainly employs two types of furnaces: circulating fluidized-bed boilers and water‑cooled vibrating grate boilers (layer‑fired boilers). Which dust‑removal methods should these two furnace types adopt to achieve emission levels comparable to those of gas‑fired boilers? How can an ultra‑low‑emission dust‑control process be selected to ensure compliance while maintaining economical operation?

From the perspective of current technology, water‑cooled vibrating grate boilers equipped with pre‑dust removal (cyclone dust collectors) and baghouse filters can achieve ultra‑low particulate emissions; however, the inlet air velocity of the cyclone collector and the flue gas velocity within the baghouse must be carefully designed. For circulating fluidized bed boilers, when a high‑efficiency separator is employed, pre‑dust removal may be omitted to reduce resistance in the flue gas system; yet, the selection of the baghouse filter requires even greater precision, primarily because these boilers operate at higher flue gas temperatures, produce larger quantities of particulates, and generate finer ash.

(7) Application of Odor-Abatement Technology in Biomass Power Plants Utilizing Agricultural and Forestry Waste

Odor generation and treatment in agricultural and forestry waste‑fired power plants. During the 13th Five-Year Plan period, environmental protection authorities expanded their monitoring of malodorous emissions from specialized sectors—such as chemical processing, municipal solid waste management, biogas production, and animal husbandry—to encompass general industries that generate odors. In Shijiazhuang, Hebei Province, a sector‑wide odor‑source survey was launched in 2017, and starting in 2020, monthly oversight and remediation measures were implemented for 14 key industries responsible for odor emissions, including malodors. So, what kinds of odors do agricultural and forestry waste‑fired power plants produce, and how can they be addressed? First, under stringent ultra‑low emission standards, boilers employing SNCR (Selective Non‑Catalytic Reduction) for flue‑gas denitrification must increase the dosage of urea or ammonia solution, which can lead to excessive ammonia slip. This results in highly irritating odors emanating from boiler ash and slag; when wet‑mixing ash removal is used, the resulting noxious fumes can even become suffocating. How can this problem be solved?

1. Employ dry ash removal (using tanker trucks or bagging) to prevent NH3 emissions, and ensure that personnel handling the ash implement reliable safety protection measures.

2. Employing technologies such as flue gas recirculation and in‑furnace temperature measurement to reduce NOx emissions at the source, thereby decreasing the amount of denitrification agent required.

3. Employ low-temperature NCR (Selective Catalytic Reduction) denitrification technology to reduce NH3 slip.

In addition, the large-scale stockpiling of fuel at direct‑combustion power plants fueled by agricultural and forestry residues, as well as the processes of crushing whole‑piece fuel and conveying loose material, can also generate unpleasant odors. How do these odors arise? When are they released in concentrated bursts? What are the approaches to managing them?

1. Within the plant, keep the moisture content of stored fuel below 30% whenever possible, and avoid re‑palletizing the stored fuel.

2. Implement appropriate shed‑covering measures at the material yard to prevent fuel from being exposed to rain, and ensure that comprehensive drainage facilities are in place.

3. Dust suppression and removal measures shall be implemented during on-site crushing of bulk materials.

4. Dust removal and ventilation measures for the feeding system.

(8) Profitability Analysis of Biomass Power Plants

Factors influencing the profitability of biomass power plants encompass site selection, design and installation, equipment selection, operational management, and more. This study conducts a systematic analysis of these various determinants, offering insights to serve as a starting point for further discussion and reference among industry peers.

Boiler-related factors: These primarily affect the power plant’s combustion efficiency, environmental emissions, and operating hours, among other aspects.

Turbine-related factors: primarily affect the power plant’s generation efficiency.

Auxiliary equipment factors: primarily affect the plant’s own‑use power ratio and operational reliability.

Fuel Management: Primarily affects the quality and price of fuel at power plants.

Operational Management: Primarily affects the plant’s operational economics and load stability.

Fuel Siting: Primarily affects the power plant’s fuel reliability and fuel costs.

Cogeneration: Primarily affects the operational efficiency and cash flow of power plants.

Power plant investment: primarily affects the power plant’s financing costs and depreciation expenses.

Design factors: Primarily affect the power plant’s overall system and capital investment.

(9) Optimization Method for Combustion Adjustment in High–Low Differential Velocity Fluidized Bed Boilers

 

1. Overview of the High–Low Differential Bed

2. Optimization of airflow adjustment

3. Optimization of flue gas temperature and reduction in carbon content of fly ash

4. Optimization of Atmospheric Emissions

(10) Sharing of Yongneng Co., Ltd.’s Experience in Fuel Procurement, Storage, and Transportation Management

1. The Role of Fuel Management in Biomass Power Plants

2. Organizational Structure for Fuel Management

3. Process Design for Fuel Management

4. Risk Control in Fuel Management

(a) Fire risk (b) Environmental risk