12
2021
11
Introduction to the Structural Types of Electric Actuators
Electric actuators come in many varieties. Based on the motion mode of the controlled object, they can be classified into the following structural types: angular‑stroke, linear‑stroke, partial‑rotation, and multi‑turn. Depending on the connection and mounting method—typically for angular‑stroke electric actuators—they are further divided into pedestal‑mounted and directly‑connected types.
Next, we will discuss which structural type of electric actuator should be selected for various valves and dampers, or, in other words, which types of electric actuators are best suited to specific controlled objects.
1. Angular Travel Electric Actuator
The output shaft of an angular‑stroke electric actuator rotates through an angular displacement, typically ranging from 0° to 90°. Such actuators are commonly used for dampers, butterfly valves, ball valves, V‑port valves, and similar applications.
Angular‑stroke electric actuators are further classified, based on their mounting method, into direct‑mount and base‑mounted types. In the direct‑mount configuration, the actuator’s output shaft is directly connected to the valve stem. By contrast, the base‑mounted configuration employs a ball joint and linkage to connect the actuator’s output shaft to the valve stem.
2. Linear Electric Actuator
The output shaft of a linear‑stroke electric actuator moves in a straight line; therefore, this type of actuator is suitable for valves whose valve plugs operate with linear motion (with the exception of globe and gate valves, which will be discussed later). Such valves include single‑seat valves, double‑seat valves, sleeve valves, angle valves, three‑way valves, diaphragm valves, and others.
3. Multi-turn electric actuator
Multi-turn electric actuators feature a rotary output shaft motion with a full-stroke exceeding 360 degrees, making them well suited for control applications such as gate valves and globe valves. These multi-turn actuators are particularly versatile: they can be equipped with an additional reduction stage to convert into either angular‑stroke or linear‑stroke electric actuators, or they can remain in multi-turn configuration. With the addition of a reduction stage, the output force (torque) is increased while the operating speed is reduced.
We hope that, through the introduction provided in the above article, readers will gain a deeper understanding of the structural types of electric actuators.
Electric actuator, linear electric actuator