06
2022
02
Term for the flow coefficient of an electric control valve
Term for the flow coefficient of an electric control valve
The flow coefficient is a fundamental parameter used to characterize the flow capacity of a control valve under specified conditions. Depending on the unit system, the flow coefficient is denoted as Kv or Cv.
Flow coefficient Kv: The flow coefficient in the International System of Units. Numerically, it equals the volume of water, at 278–313 K, that flows through the screen in one hour under a pressure drop of 10 Pa.
Flow coefficient Cv: The flow coefficient in the imperial system, numerically equal to the number of US gallons of water that flow through the valve in one minute under a pressure drop of 1 psi at flow rates between 40 and 100.
Rated flow coefficient: the value of the flow coefficient under the rated stroke.
Relative flow coefficient: the ratio of the flow coefficient at a given stroke to the rated flow coefficient, denoted by q.
Calculated maximum flow coefficient: the flow coefficient calculated based on the maximum flow rate and the corresponding pressure differential.
Calculated normal flow coefficient: The flow coefficient calculated based on the normal flow rate and the corresponding pressure differential.
Rated valve capacity: the flow rate of a fluid passing through the valve under specified conditions (whether compressible or incompressible).