30
2022
03
What components should be inspected when maintaining an electric control valve?
Electric control valve The service life of a valve primarily depends on the impact of the internal medium on the valve. Electric control valves are typically used with liquids or fluid media. Many manufacturers encounter internal leakage issues during operation. Depending on the specific circumstances, the appropriate corrective measures will vary. When internal leakage occurs, the first step is to verify whether the actuator can achieve proper sealing and whether the valve can close fully. Electric control valves are designed as downward‑push‑to‑close types. If the actuator’s thrust is insufficient, the valve may easily reach the fully closed position under zero‑pressure conditions. However, when subjected to downward force, it cannot counteract the upward pressure of the fluid, resulting in an inability to close.
Local control of electrically actuated control valves can affect internal leakage. Traditionally, electric control valves have been regulated using mechanical devices such as valve‑position limit switches and torque switches. However, these components are susceptible to environmental factors—such as temperature, pressure, and humidity—which can compromise valve positioning. Misalignment, spring fatigue, and uneven thermal expansion coefficients further contribute to internal leakage in electric control valves.
In addition, this equipment has been in service for an extended period; wear and aging can lead to internal leakage. If left unaddressed, the leakage will progressively worsen. Therefore, during operation of valve equipment, it is necessary to recalibrate the actuator and perform regular maintenance and corrective actions. Long-term maintenance of control valves is essential—so what components should be inspected during maintenance? Under conditions of high pressure differentials and corrosive media, the inner wall of the valve body and the diaphragm of diaphragm valves are frequently subjected to erosive and corrosive attack, necessitating checks for pressure integrity and corrosion resistance. The spool of a slide‑valve is one of the moving parts of a control valve and can suffer severe corrosion from the process fluid. During maintenance, the valve plug should be carefully examined for signs of corrosion or wear.