28
2022
11
What is an intelligent electric control valve?
The intelligentization of valves is an inevitable trend in the development of industrial automation technology. With advances in science and technology and rising living standards, increasingly stringent requirements are being placed on valve products. To achieve modernization, standardization, and product line diversification, as well as to reduce energy consumption and conserve resources, the smart electric control valve—hereafter referred to as the electric control valve—has been developed. It boasts advantages such as rapid response, high control accuracy, excellent flow characteristics, and a novel structural design.
Composition and operating principle of the electric control valve:
The intelligent electric control valve consists primarily of three components: the actuator (including a pneumatic diaphragm actuator or an electro-hydraulic pushrod actuator), the electrical control system, and the signal feedback system.
The actuator converts the pressure energy of the controlled medium into mechanical kinetic energy, which is then transmitted to the motor; at the same time, it receives command signals from the controller to perform opening or closing operations. Its operating principle is identical to that of a manual butterfly valve.
The primary function of the electrical control system is to receive and process various discrete input signals from the controller, then drive the corresponding solenoids to generate the required thrust, thereby moving the piston and adjusting the fluid flow rate. Its operating principle is similar to that of a conventional electric motor.
The control system performs the logical and control computations necessary to implement the aforementioned functions. Its primary tasks include: setting program parameters according to process requirements and storing them in memory for on-site commissioning; displaying the operating status of each component via indicator lights and transmitting this information to the controller, thereby enabling real-time monitoring of the system’s operational condition, among other duties.
The sensor continuously monitors the pressure being regulated and transmits the acquired data to the controller, which processes it to generate the required output data for the user’s reference.
In actual production, equipment failures frequently occur due to environmental constraints or human error and are often unavoidable. Therefore, in daily operations, it is essential to equip the facility with appropriate monitoring instruments to track equipment performance, promptly detect anomalies, swiftly resolve malfunctions, and restore normal production, thereby ensuring uninterrupted manufacturing processes.
When a device’s parameters exceed their pre-set limits, its operating state is automatically switched by the control program to an alternative set of operating procedures, which continue until normal conditions are restored. This approach achieves automated control and embodies the fundamental principle of automatic control systems—what is known as “adaptive control.”
Previous page