07

2022

12

Comparison of Advantages of Smart Electric Actuators


The intelligent electric actuator is driven by a three-phase induction motor, which, via a worm‑gear reduction mechanism, transmits torque to the hollow output shaft. The reducer features manual–electric switching: when the switch handle is in the manual position, the handwheel drives the hollow output shaft through a clutch; when switched to electric operation, the actuator automatically returns to the electric position, engaging the clutch and the worm gear, and the three-phase motor then drives the hollow output shaft.
As the industry continues to evolve, user expectations for intelligent electric actuators are steadily rising. Consequently, the development of smart products that integrate mechanical automation, microelectronics, and modern control theory has become inevitable. Building on existing smart solutions, this project takes a further step forward by incorporating advanced mechanical designs and an intelligently integrated electro‑control architecture, delivering reliable operation, ease of use, and enhanced intelligence. The intelligent electric actuator is a fully featured, high‑performance product. The new-generation intelligent user interface, based on an advanced internal bus hardware architecture, showcases cutting‑edge intelligent control capabilities, elevating both the user experience and system safety and stability to unprecedented levels.
Advantages of Pneumatic Actuators
1. It accepts continuous pneumatic signals and outputs linear displacement; when equipped with a rocker arm, it can also output angular displacement.
2. It has both forward and reverse action functions.
3. It has a very high movement speed, but its speed decreases as the load increases.
4. The output force is related to the operating pressure.
5. High reliability, but the valve cannot maintain its position when the air supply is interrupted.
6. It is difficult to implement segmented control and programmatic control.
7. Simple inspection and maintenance, with excellent environmental adaptability.
8. The output power is relatively high.
9. It has explosion-proof functionality.
Advantages of Intelligent Electric Actuators
1. Energy is easy to access, signal transmission is fast, and the transmission distance is long.
2. The intelligent electric actuator features relatively high accuracy and sensitivity, is easy to operate when integrated with other electric control instruments, and offers simple wiring and installation.
3. Performance verification demonstrates that the intelligent electric actuator exhibits excellent resistance to load deviations, with its output torque or thrust remaining essentially constant. It effectively counteracts unbalanced forces from the process medium, ensuring precise control of relevant process parameters; consequently, its control accuracy is slightly higher than that of pneumatic actuators.
4. When equipped with a servo amplifier, the intelligent electric actuator can readily switch between direct and reverse action and easily set the signal‑to‑valve position relationship. Moreover, in the event of a fault, it will invariably remain at its last position—capabilities that pneumatic actuators cannot achieve, as they rely on an auxiliary protective system to provide position‑holding functionality.