18

2022

12

Why use a winding thermometer?


A thermometer is a common measuring instrument that can be used to record parameters such as atmospheric pressure, liquid column height, and liquid density. Moreover, winding thermometers offer numerous advantages in practical applications.
1: The function of the winding thermometer
A winding thermometer is an instrument used to measure the surface temperature of insulating materials. It can determine the maximum, minimum, and average temperatures of the insulation, as well as the corresponding volume‑pressure values. In addition, it can be employed to monitor the heat distribution within different regions of the insulation. Proper use of a winding thermometer is crucial for ensuring the safe operation of the power grid. First, ensure that the winding thermometer is functioning correctly; otherwise, serious consequences—such as fires—may occur. Second, when using the thermometer, observe the following precautions: 1) Do not insert the thermometer directly into high‑temperature objects; 2) Do not operate the thermometer with wet hands or immerse it in hot water; 3) Maintain good ventilation in the operating environment; 4) Avoid exposure to moisture; 5) Prevent immersion in high‑temperature liquids; 6) If any issues arise, contact a qualified professional promptly.
2: How to Properly Use a Winding Temperature Gauge
A winding thermometer is a device used to measure the temperature of fluids flowing through heat exchanger tubes. It can accurately monitor all changes that may occur within the heat exchanger, including flow, heat transfer, and cooling processes. When using a winding thermometer, please observe the following guidelines: 1. Ensure that the winding thermometer is installed correctly. This is especially important for those who are unfamiliar with the instrument or cannot confirm whether it has been properly mounted. 2. After use, store the winding thermometer in a cool, well-ventilated location. 3. If you are testing or calibrating a new system, be sure to first verify that the winding thermometer is in good working condition. 4. If the winding thermometer malfunctions, contact the company’s customer service department for assistance.
3: Common Issues and Solutions
Common issues with winding thermometers and their solutions are as follows: 1. Fault analysis: The primary function of a winding thermometer is to measure the temperature rise in transformers, reactors, and cables. A malfunction can lead to an escalation of the fault or necessitate replacing the winding thermometer. 2. Root cause analysis: Winding thermometer failures typically arise from the following causes: (1) a decline in insulation resistance; (2) damage to internal windings or degradation of the insulation layer; (3) poor contact or short circuits in external leads; (4) an increase in the internal resistance of the ammeter; (5) deformation of the thermometer probe; and (6) environmental factors.
Therefore, for those who need to measure a specific object or quantity with high precision, using a winding thermometer is highly advisable. This approach not only ensures accurate data but also helps prevent errors.