Product Series
DKZ Standard Type
Phone: 400-706-6090
Email: 13566771002@139.com
- Product Description
-
- Commodity name: DKZ Standard Type
- Commodity ID: XL-D001
The DKZ (ZKZ) type electric linear actuator is powered by a single-phase AC supply and, when used with a servo amplifier…
During integration, it accepts a standardized signal of 4 mA–20 mA DC (or 0–10 mA DC) and converts this signal into its corresponding…
Mechanical linear displacement, simple operation, double-seat control valves, sleeve valves, and others perform the regulatory functions of the process system:
Characteristics
● The position transmitter employs gear-driven transmission to ensure reliable and accurate limit switching.
● Equipped with a precision conductive plastic potentiometer featuring angle indication, it offers convenient and intuitive adjustment.
● The circuit employs an epoxy‑encapsulated modular design and undergoes high‑ and low‑temperature aging to ensure stability and reliability.
● The motor is an outdoor‑type servo motor with overload protection.
Model Designation Explanation
DKZ-310(CXH)
DK: Standard type Z: Linear stroke 310: Output force
H: With “H” indicates an outdoor type; without “H” indicates a standard type (optional)
C: “C” indicates a 4–20 mA feedback signal; absence of “C” indicates a 0–10 mA feedback signal.
X: “X” indicates the presence of an electrical limit switch; “no X” indicates its absence.
Technical SpecificationsProject Name DKZ Standard Type (without H) DKZ Outdoor Type (with H) Control
InstitutionInput signal None Feedback signal 0–10 mA DC, 4–20 mA DC Dead zone 0.4%–3% 0.4%–3% Basic error ±2.5% ±2.5% Hysteresis ≤1.5% ≤1.5% Limit position Open side, closed side Open side, closed side Opening degree detection Precision conductive plastic potentiometer Precision conductive plastic potentiometer
PowerPower 220V, 50Hz 220V, 50Hz Drive motor Servo motor Servo motor Affiliated institution
Heater Optional item Optional item Manual mechanism Handwheel Handwheel Installation
ConditionsAmbient temperature No heater—25°C to +70°C No heater—25°C to +70°C Relative humidity <95% <95% Ambient gas Non-corrosive gas Non-corrosive gas Wiring port Fourteen-pin plug terminal block Protection Level IP65 Model and Specifications
Table 2
Model numberRated load
(N)Rated stroke
(mm)Total travel time
(S)Rated current
(A)Quality
(Kg)DKZ-310
DKZ-310H4000 10
8
0.65 50 16
125
25
20
30
24
DKZ-410
DKZ-410H6400 18
16
0.65 50 30
24
40
32
60
50
DKZ-510
DKZ-510H16000
30
16
1.5 95 50
30
60
40
100
60
DKZ-610
DKZ-610H25000 30
16
2.5 110 50
30
60
40
100
60
Table 3
Model numberLength × Width × Height
Valve stem connection screw hole
Flange
Flange
Flange
Nominal diameter
Connector to the bottom of the flange
AXBXC
F
Connection hole spacing E
Connection hole spacing E
Matching inner diameter G
Dg
Itinerary
L
DKZ310 230X460X490 M8 Φ80 2×Φ11 Φ60 25, 32,
40, 50
10
85.5
16
79.5
25
70.5
DKZ410230X530X540
M12X1.25
Φ105
4 one Φ11
Φ80
65, 80, 100
40
107
230X460X575
M16X1.5
Φ118
4 one Φll
Φ95
125, 150
60
112
DKZ510260X630X625
M16X1.5
Φ118
4 one Φll
Φ95
200
60
113
260X630X645
M20X1.5
Φ130
4×Φ18
Φ100
300, 250
100
93
DKZ610260X720X625
M16X1.5
Φ118
4 one Φ1l
Φ95
400, 500
60
113
260X720X645
M20X1.5
Φ130
4×Φ18
Φ100
500, 600
100
93


Ordering Instructions
When placing an order, please provide the following information:● Electric actuator name, model, and stroke● Is a servo amplifier required? If so, please specify the name and model number.● The servo amplifier models compatible with this product are as follows: ZPE—2030 ZPE—3101
● Other special requirements ( As per the protection rating requirements, input signal requirements. )
● The itinerary can be customized according to the user’s specific requirements. When using a split nut to connect the output shaft, please provide relevant instructions.
China’s instrumentation industry is poised to seize numerous opportunities. The growth of new energy sources such as wind, nuclear, and solar power; the development of the Internet of Things, smart grids, and high-speed rail and urban rail transit; along with emerging trends toward energy conservation, reduced emissions, and low‑carbon practices, are all expanding the scope of applications and market demand for instruments and meters. Driven by advances in microelectronics, computing, networking, and communications technologies, the intelligentization of instrumentation has become the prevailing trend. Accordingly, during the 12th Five-Year Plan period, China will prioritize the development of smart instruments and meters, push into high‑end segments, and elevate the overall level of the industry.
Previous:
Online Consultation