23
2020
07
Explosion-proof certificate for the 2SA5 series variable-frequency electric actuator
Explosion-proof rating CT4. Variable-frequency electric actuators: Multi-turn electric actuators are the most basic type of actuator. Both linear‑stroke and angular‑stroke actuators are assembled by combining multi-turn actuators with other mechanical components. The primary technical parameters of multi-turn actuators are the closing torque (Nm) and the output shaft speed. There are six standard models of the SURPASS 5 PROFITRON multi-turn actuator, with torque ratings ranging from 10 Nm to 1000 Nm. Multi-turn actuators with a closing torque exceeding 1000 Nm are constructed by integrating lower‑torque multi-turn actuators with GK (or GST) reduction gearboxes. The SURPASS 5 PROFITRON multi-turn actuator can be equipped with various internationally standardized mechanical interfaces—output shafts and flanges—enabling proper mechanical connections to a wide range of controlled devices. Its flanges and output shafts comply with the international standards DIN ISO 5210 or DIN 3210. A linear‑stroke electric actuator consists of two main parts: a multi-turn electric actuator and an integrated linear‑motion drive unit. Its key technical parameters include the closing thrust (kN), the linear velocity of the output shaft (mm/min), and the maximum stroke (mm). The SURPASS 5 PROFITRON linear‑stroke actuator offers a thrust range of 3.4 to 217 kN and a speed range of 70 to 1120 mm/min, with adjustable settings.
Previous page
Next
Previous page
Next