24

2020

07

Working Principle of Electric Valves


Electric valve Working principle of electric actuators I. Selecting an Electric Actuator Based on Valve Type 1. Rotary-stroke electric actuator (360° rotary type) is suitable for butterfly valves, ball valves, plug valves, and similar devices. The output shaft of the electric actuator rotates less than one full revolution—i.e., less than 360 degrees—and typically completes the valve’s opening and closing cycle with a 90-degree rotation. Depending on the mounting interface, such electric actuators are further classified into two types: direct‑mount and base‑crank. A) Direct‑mount type: the actuator’s output shaft is directly connected to the valve stem. B) Base‑crank type: the output shaft is linked to the valve stem via a crank mechanism. 2. Multi‑turn electric actuators (rotary angle > 360°) are used for gate valves, globe valves, and similar applications. The actuator’s output shaft rotates more than one full revolution—i.e., more than 360 degrees—and usually requires multiple turns to control the valve’s opening and closing process. 3. Linear‑stroke electric actuators (linear motion) are suitable for single‑seat control valves, double‑seat control valves, and other similar devices. In these actuators, the output shaft moves in a straight line rather than rotating.

123