04

2025

01

Electric Actuator Manual


I. What is an electric actuator?
Electric actuators are indispensable, critical components in modern industrial automation. Powered by electric motors, they enable precise control of valves, regulators, switches, and other devices, finding widespread application across industries such as petrochemicals, power generation, mechanical manufacturing, water treatment, and building automation. Serving as the actuating element in control systems, electric actuators receive signals from higher-level controllers—such as PLCs or DCSs—enabling remote automated operation. This enhances production efficiency, minimizes human intervention, and improves system reliability and safety.

The core component of an electric actuator is the electric motor, which typically employs DC motors, AC motors, or stepper motors, among other types. Depending on the application requirements, it is equipped with various drive mechanisms and control systems. Electric actuators can precisely adjust the opening, position, or angle of valves, valve stems, or other mechanical components in response to control signals, thereby enabling accurate regulation of parameters such as flow rate, pressure, and temperature.

II. Working Principle of Electric Actuators
The operating principle of an electric actuator is primarily divided into three major components: signal reception, mechanical actuation, and position feedback.

Signal Reception:
Electric actuators are typically integrated with control systems—such as PLCs or DCSs—to receive electrical control signals. These signals may be on/off commands or analog signals, such as 4–20 mA or 0–10 V. The type and precision of the signal directly affect the actuator’s accuracy and response speed.

Mechanical drive:
Once a control signal is received, the electric motor inside the electric actuator begins to operate, converting its rotational motion into linear or angular motion—such as rotation, pushing, or pulling—via a mechanical transmission system. This conversion is typically achieved through gear sets, lead screws, or other transmission mechanisms.

Position Feedback:
Electric actuators are typically equipped with position sensors, such as encoders or potentiometers, to monitor the actuator’s positional changes in real time. By using feedback signals, the control system can determine the actuator’s current state and adjust its output accordingly, enabling precise control.

III. Classification of Electric Actuators
Depending on the drive type and control mode, electric actuators can be classified into several major categories. Understanding these classifications is essential for users when selecting the appropriate actuator.

Classification by drive type:
Electric rotary actuators: These actuators are primarily used to control rotary equipment, such as opening and closing, adjusting, and regulating valves. Common applications include controlling ball valves, butterfly valves, and control valves.

Electric linear actuators are primarily used in applications requiring linear motion, such as adjusting sliding doors and windows, or controlling the vertical and horizontal movement of objects.

Electric lifting actuators: These actuators are typically used in applications requiring extensive vertical adjustment, such as lift platforms and seat adjustments.

Classification by control method:
On-off actuator: This type of actuator is used solely for on/off control and is typically employed in simple valve‑on/off control systems.

Regulating actuators can precisely adjust valves and control parameters such as flow, pressure, and temperature in response to control signals, making them suitable for complex automated systems.

Smart Actuators: Smart actuators integrate advanced intelligent control functions, such as self-learning, self-diagnosis, and remote monitoring, enabling seamless integration with modern industrial automation systems and delivering more efficient, more precise control.

IV. Application Areas of Electric Actuators
Electric actuators are widely used across various industries. Below are some typical application areas:

Petrochemical Industry:
In petrochemical production, electric actuators are commonly used for the precise control of parameters such as flow rate, pressure, and temperature. Particularly in valve control, electric actuators help ensure the stability and safety of petrochemical processes.

Power Industry:
In the power generation process, electric actuators are widely used to control the opening and closing of valves, regulators, and other equipment, thereby ensuring the safe operation of power plant facilities. They are also employed in the regulation and control of steam turbines to maintain the stability of generator sets.

Water treatment industry:
Electric actuators are also widely used in the water treatment industry, commonly employed to regulate water flow, control the opening and closing of valves, and adjust the operating conditions of various water treatment equipment.

Building Automation:
In the smart building sector, electric actuators are commonly used for curtain control, the opening and closing of motorized doors and windows, and HVAC system regulation, thereby enhancing the building’s level of intelligence and occupant comfort.

Mechanical manufacturing industry:
Electric actuators are used in mechanical manufacturing to control assembly, handling, and conveying operations on automated production lines, significantly enhancing both production efficiency and the level of automation.

V. Selection Guide for Electric Actuators
Selecting the appropriate electric actuator is critical to the smooth operation of an automated control system. The following are several key factors to consider during the selection process:

Load requirements:
Select an electric actuator that matches the size of the load to be driven. If the load is heavy, choose an actuator equipped with a high‑power motor; otherwise, a lower‑power actuator will suffice.

Control accuracy:
For applications requiring precise control, it is necessary to select electric actuators with high-precision control capabilities, such as modulating actuators equipped with encoders.

Work environment:
Select an appropriate electric actuator based on the temperature, humidity, corrosivity, and other characteristics of the actual operating environment. In harsh environments, choose an actuator that offers waterproofing, dustproofing, and corrosion resistance.

Response speed:
The response speed of an electric actuator directly affects the real-time performance of the control system. For applications requiring rapid response, selecting an electric actuator with fast response characteristics is essential.

Communication method:
In certain complex control systems, electric actuators must exchange data with other devices. In such cases, it is especially important to select intelligent electric actuators that support a variety of communication protocols, such as Modbus, Profibus, and Ethernet.

VI. Maintenance and Servicing of Electric Actuators
As a precision automated device, proper maintenance and care are essential for ensuring the long-term, stable operation of electric actuators. The following are common maintenance and servicing practices for electric actuators:

Regular inspections:
Regularly inspect the actuator’s electrical connections to ensure that the wiring is secure and undamaged.

Inspect the actuator’s mechanical components for wear, looseness, or deformation, and make timely adjustments or replacements as needed.

Inspect the control signals of the electric actuator to ensure their accuracy and stability.

Cleaning and Lubrication:
The internal mechanical components of the actuator, such as gears and lead screws, require regular cleaning and lubrication to ensure smooth operation.

For certain applications involving harsh environmental conditions, specialized anti-corrosion lubricants should be used.

Electric Motor Maintenance:
The motor is the core component of an electric actuator. Regular maintenance—such as cleaning the motor’s cooling system, replacing worn brushes, and checking the motor’s voltage and current—can effectively extend its service life.

Temperature Monitoring:
High temperatures are a significant factor in the failure of electric actuators, particularly under heavy-load conditions. To prevent prolonged exposure to excessive temperatures, temperature sensors should be used or regular inspections conducted.

Troubleshooting:
Regularly perform troubleshooting on electric actuators. If an abnormality occurs, identify the root cause by inspecting the actuator’s operating status, signal inputs and outputs, and mechanical transmission components, and promptly repair or replace any damaged parts.

VII. Future Development Trends of Electric Actuators
As the level of industrial automation continues to rise, electric actuator technology is also advancing steadily, with the following key development trends emerging:

Intelligent Development:
Future electric actuators will be even more intelligent, featuring self-diagnosis, remote monitoring, and data acquisition and analysis capabilities. By connecting to cloud platforms and the Internet of Things, they will enable more efficient and precise control.

High Performance and High Reliability:
By adopting more advanced materials and manufacturing processes, future electric actuators will be more durable and reliable, capable of withstanding even harsher operating conditions.

Energy conservation and environmental protection:
Energy efficiency and environmental protection will become key considerations in the design of electric actuators. By optimizing motor designs and control systems, the energy efficiency of electric actuators can be improved, helping enterprises reduce energy costs.

Integration and Modularization:
Electric actuators will progressively evolve toward integration and modularity, enabling users to flexibly combine and configure them according to their needs, thereby enhancing system compatibility and scalability.

VIII. Conclusion
As a critical actuating component in automated control systems, electric actuators hold vast potential across diverse industries as industrial intelligence and automation continue to advance. When selecting, operating, and maintaining electric actuators, understanding their operating principles, application areas, and key selection criteria can help ensure efficient, stable performance, boost production efficiency, and support enterprises in their digital transformation and intelligent upgrades.

Electric actuators, automation control, actuator selection, applications of electric actuators, intelligent control