31

2025

07

SopaiShi Electric Actuators — Experts in Industrial Control for Extreme Environments


I. Product Spotlight: A Reliable Companion in Extreme -30°C Conditions
In the field of industrial automation, a device’s environmental robustness directly determines production continuity. The Soupaishi 2SA series electric actuators have undergone rigorous 1,000-hour testing in ESPEC’s specialized chambers, achieving zero‑failure operation under alternating conditions of –30°C and 98% RH, with torque output deviation below 0.5% and response times on the order of milliseconds. Their performance far exceeds the IEC 60068‑2‑1 standard, making them widely deployed in extreme environments such as Arctic oil and gas extraction, deep-sea platforms, and chemical reaction vessels.

Technological Breakthrough:

  Aerospace-grade materials: Aluminum alloy housing + low-temperature-resistant composite material, with salt-spray corrosion resistance improved by a factor of three.
  Dual-seal design: IP68 rating: no leakage after 72 hours of immersion at a depth of 10 meters.
  Intelligent Temperature Control System: Automatic preheating at -30°C; motor temperature fluctuation ≤ ±1°C.
Explosion-proof certification: Ex db ⅡC T6 Gb certified, suitable for use in Zone 0 explosive atmospheres.


II. Scenario-Based Solutions: From the Laboratory to the Industrial Site
1. Polar Energy Development
In a certain LNG project, 2SA5-series actuators operated continuously for three years in an extreme cold environment of –55°C, working in conjunction with ball valves to achieve rapid isolation of LNG storage tanks. The failure rate was reduced by 87% compared with conventional pneumatic actuators.

2. Deep-Sea Equipment Control
The 2SBW series, certified by DNV GL, achieves precise valve actuation at a depth of 1,500 meters underwater under a −25°C operating condition on South China Sea oil and gas platforms, with position control accuracy reaching 0.1°.

3. Chemical Reaction Control
On a PTA production line at a petrochemical enterprise, actuators have operated reliably for five years in an environment of –30°C and 98% relative humidity, enabling temperature control of the oxidation reactor with an accuracy of ≤±0.5°C and reducing annual production downtime losses due to equipment failures by more than RMB 2 million.

III. Authoritative Certification and Data Endorsement
Core Qualifications: IP68 protection, ATEX explosion-proof certification, UL certification, and DNV GL classification society certification
Test data:
    Low-Temperature Start-Up Test: - Operates continuously through 100,000 start-stop cycles at -30°C without any sticking or jamming.
    Damp-Heat Cycle: 500 cycles – alternating temperature test from 30°C to 85°C, insulation resistance > 100 MΩ
    Vibration Resistance: 10 g acceleration, full‑band vibration testing from 20 to 2000 Hz with no displacement.

IV. User Testimonials: Defining Industry Benchmarks with Real-World Evidence
“In CNOOC’s Bohai Sea platform project, the Soupai‑Shi actuator withstood the 2018 cold wave at –30°C, achieving 18% energy savings compared to imported brands and reducing maintenance costs by 40%.”

 

Sopai Electric Actuator, High–Low Temperature Cyclic Humidity Test Chamber, IP68,Protection, electric actuator, explosion-proof certification