21
2025
08
Common Faults and Troubleshooting Methods for Electric Actuators
Common Faults and Troubleshooting Methods for Electric Actuators
As a critical component of automated control systems, electric actuators are widely used in industries such as chemical processing, power generation, machinery, and shipbuilding, where they ensure the precise operation of valves, switches, valve positioners, and other equipment. Over prolonged service, electric actuators often experience malfunctions due to operating conditions, improper handling, or equipment aging. Understanding these common faults and mastering appropriate troubleshooting methods can help prevent unnecessary production downtime and equipment damage.
I. Common Faults and Symptoms
The electric actuator cannot start.
This is one of the most common malfunctions. When an electric actuator fails to start, first verify that the power supply is functioning properly and check for open circuits or undervoltage. Also, inspect the internal control signals to ensure they are normal and look for any poor connections or faults in the circuitry.
Performance: The indicator light on the electric actuator is off, or there is no movement at all.
The actuator operates sluggishly or becomes stuck.
If the electric actuator becomes sluggish or experiences sticking during operation, it is often due to wear of mechanical components, inadequate lubrication, or excessive external resistance.
Performance: The actuator cannot complete the on/off operation quickly, emits abnormal noise during operation, and moves sluggishly.
Overload protection operation
When the electric actuator is subjected to an excessive load, the overload protection function activates, causing the actuator to stop operating. Overload typically occurs when the control valve or associated equipment presents excessive resistance, preventing the electric actuator from delivering its intended torque or force.
Performance: The actuator has suddenly stopped functioning, with the indicator light flashing or displaying an overload error.
Electric actuator overheating
Prolonged operation under overload conditions or excessively high ambient temperatures may cause the motor or internal components of an electric actuator to overheat. Overheating can severely degrade equipment performance and may even result in component failure due to burnout.
Performance: The actuator housing temperature rises, causing the equipment to shut down or triggering a fault alarm.
Execution precision is inaccurate.
Inaccurate actuation precision is commonly observed after prolonged use of actuators, as wear of components or instability in control signals can lead to increased angular deviation, thereby compromising control performance.
Performance: The valve opening does not match the preset value, resulting in poor control performance and sluggish system response.
II. Troubleshooting Methods
Methods for Troubleshooting an Electric Actuator That Fails to Start
First, check the power supply to ensure it is functioning properly. If the power supply is fine, inspect the circuit connections for looseness or short circuits. For abnormal control signals, verify that the control system or inverter is operating correctly. If the actuator’s motor is faulty, it may need to be replaced or repaired.
Processing steps:
Check the power supply and voltage.
Check the circuit connectors;
Check whether the electrical control signals are functioning properly.
Check whether the motor of the electric actuator is damaged.
Methods for addressing sluggish or stuck actuator operation
For actuators that exhibit sluggish or stuck‑in‑place operation, first inspect the mechanical components for accumulated dust, rust, or other obstructions. Verify that lubricant levels are adequate; insufficient lubrication increases friction and can lead to binding. Regularly inspect and clean mechanical parts, and replenish lubricant as needed—these are effective measures to prevent this issue.
Processing steps:
Clean the actuator;
Inspect and replace the lubricating oil.
Inspect the mechanical components for wear.
Repair or replace damaged components.
Methods for Handling Overload Protection Trips
When an electric actuator enters overload protection mode, first verify whether the load exceeds its design limits. Reduce the resistance of the valve or equipment as needed and adjust the controller settings to prevent overload. At the same time, inspect the electric actuator for any signs of damage or aging to ensure it maintains its rated load capacity.
Processing steps:
Check the load condition to confirm whether it is overloaded.
Adjust the load conditions to reduce resistance.
Inspect the actuator’s condition and perform repairs or replacement as necessary.
Methods for Addressing Overheating in Electric Actuators
If the equipment overheats, it should be shut down immediately and the cause investigated. Check whether the electric actuator has been operating under high load for an extended period, or whether the equipment’s temperature has risen abnormally due to excessively high ambient temperatures. Possible solutions include adjusting the load conditions, improving ventilation, or installing a cooling system for the equipment.
Processing steps:
Perform a shutdown inspection of the actuator;
Check whether the load conditions are reasonable.
Improve equipment ventilation or install cooling devices;
Regularly inspect the cooling system of the electric actuator.
The long-term operation and maintenance of electric actuators depend on regular troubleshooting and corrective action. Preventive maintenance and timely fault diagnosis are essential for ensuring the equipment’s reliable performance. We will continue to examine additional failure modes and their corresponding solutions, helping users gain a more comprehensive understanding of electric actuator maintenance techniques.
III. Methods for Addressing Inaccurate Execution Precision
Inaccurate actuation precision is a common issue across many industrial sectors, particularly after prolonged use, when wear or aging of components can degrade the control accuracy of actuators. To address this problem, first verify whether the actuator’s control system is subject to signal interference or instability. Inspect mechanical components for signs of wear and replace any damaged parts as needed. Regular equipment calibration is also an effective measure for maintaining actuation precision.
Processing steps:
Check the stability of the control signal.
Calibrate the actuator;
Inspect and replace worn mechanical components.
Ensure that the components of the actuator are in optimal condition.
IV. How to Perform Daily Maintenance
Regularly inspect the electrical system and mechanical components.
The electrical system and mechanical components of electric actuators require regular inspection to prevent potential failures. Electrical checks should cover control signals, cable connections, contactors, variable frequency drives, and other components to ensure their proper operation. Mechanical inspections should focus on the actuator’s rotating parts, fasteners, lubrication system, and similar elements, verifying that there is no looseness, wear, or binding.
Cleaning and lubrication
Cleaning and lubricating the actuator are essential for ensuring the equipment’s long-term, stable operation. Regularly remove dust and contaminants from inside the actuator to prevent foreign particles from compromising its performance. Replenish and replace the lubricant to reduce friction and protect mechanical components from seizing or excessive wear due to inadequate lubrication.
Temperature Monitoring
Due to the complex operating environment of electric actuators, excessive temperature is one of the major causes of failure. Therefore, regularly monitoring equipment temperature and maintaining an appropriate operating temperature are essential for extending the service life of the equipment.
Regular verification
Regular calibration of electric actuators is essential to ensure that their positioning accuracy and response time meet specified requirements. For systems with stringent precision demands—particularly electric actuators used in large-scale automated equipment—enhanced calibration efforts are crucial to prevent production issues arising from inaccuracies.
V. Summary
Electric actuators are indispensable components in automated control systems; however, during prolonged operation, they may encounter various malfunctions. By mastering the diagnosis and troubleshooting of common faults, operators can promptly identify and resolve issues, ensuring stable equipment performance. Routine maintenance and upkeep are equally critical: only through rigorous daily inspections and timely addressing of potential problems can the service life of electric actuators be extended, thereby guaranteeing smooth production processes.
Through scientific and rational maintenance and management, it is possible not only to enhance the operational efficiency of electric actuators but also to reduce production costs and improve the stability and reliability of the entire automation system. In the future, as technology continues to advance, the performance of electric actuators will become even more refined, and their service life will be further extended.
Electric actuators, common faults, troubleshooting methods, equipment maintenance, valves