26

2021

11

How to Install and Commission an Electric Actuator


How to Install and Debug Electric actuator
People involved in industrial production are familiar with electric actuators. They serve as the terminal devices for measurement and control in manufacturing processes. After the input signal from the frequency display is received, the control signal is automatically converted into a parameter‑displacement‑guidance mechanism; following analysis, this mechanism executes motion according to a specified displacement. Depending on the control method, electric actuators can be classified as proportional or integral types. While their fundamental operating principles are the same, they have been adapted with specific enhancements to meet the requirements of certain specialized industries.

Electric actuators can regulate various valves and gates, as well as control system pressure and temperature, playing an irreplaceable role in power systems, industrial production, wastewater treatment, and other sectors.
 
After purchasing an electric actuator from the market, it should be installed and commissioned in accordance with the product specifications. Generally, electric actuators are pre‑adjusted at the factory. In principle, no modifications are permitted.

 2SA8 Series Intelligent Variable-Frequency Type
 
Precautions during installation: Before installation, ensure that the upstream valve, the valve itself, and the actuator are fully open or fully closed. Remember to synchronize the actuator’s output shaft with the valve position after mounting it on the base. Secure the actuator to the mounting bracket using screws, then manually turn the handwheel to verify that the actuator and valve engage smoothly and operate correctly. Once assembled, proceed with commissioning: connect the power cable to supply power, manually open the valve halfway, and press the self‑test button.
 
The self‑test procedure requires a certain response time. If the valve is fully open, it may experience severe fluid impact with the instrument, damaging the internal valve disc and rendering the equipment inoperable.