11

2021

12

How to Choose the Right Electric Actuator


With the advancement of the times, intelligent technologies are becoming increasingly prevalent in the valve industry.
As is well known, Electric actuator They are primarily used in conjunction with valves to control their opening and closing. The type of electric actuator required varies depending on the valve’s operating mode; therefore, when selecting an electric actuator for a valve, it is essential first to identify the valve type. For example, valves that perform multi‑turn operations—such as gate valves, globe valves, and diaphragm valves—require multi‑turn electric actuators, commonly referred to as Z‑type electric actuators. In contrast, valves that rotate through 90 degrees—such as butterfly valves, ball valves, and damper valves—call for quarter‑turn electric actuators, which include Q‑type electric actuators, angular‑stroke electric actuators, or compact electric actuators.


Therefore, the selection of an electric actuator should be based on the valve’s opening and closing mode:
1. Multi-turn electric actuator
A multi-turn electric actuator is also a type of electric actuator that delivers angular torque. Unlike an angular‑stroke electric actuator, its output shaft rotates through more than 360 degrees. Multi-turn electric actuators are suitable for rotary valves, such as gate valves and globe valves.
2. Linear Electric Actuator
Linear electric actuators generate linear thrust and are suitable for valve types that require lifting‑and‑lowering control of the valve disc, such as single‑seat and double‑seat control valves.
3. Angular Travel Electric Actuator
Angular‑stroke electric actuators are used in conjunction with rotary valves. The output shaft of an angular‑stroke electric actuator rotates less than one full revolution, i.e., less than 360 degrees. For example, butterfly valves, ball valves, and plug valves typically require a rotation angle of less than 90 degrees; when the angular‑stroke electric actuator reaches the 90-degree position, it can complete the valve’s opening and closing cycle.
Now that we know which valves can be paired with which electric actuators, the next step is to determine the torque required to open the valve. To calculate the valve’s torque, two essential parameters are needed: the nominal diameter and the nominal pressure.