28
2022
04
How to select the flow rate for an electric control valve?
The flow characteristics of an electric control valve directly affect the control quality and stability of the system; therefore, proper selection is essential.
The flow characteristics of electric control valves are classified into ideal flow characteristics and operating flow characteristics. Generally, manufacturers specify the ideal flow characteristic, whereas practical applications require the operating flow characteristic. Because the pressure drop ratio S is less than 1, the operating flow characteristic exhibits a convex shape. Therefore, when selecting the flow characteristic of a control valve, one should first prioritize the operating flow characteristic and then choose the ideal flow characteristic based on the specific application. Commonly used ideal flow characteristics in practice include linear, equal‑percentage, and quick‑opening. The quick‑opening characteristic is primarily employed in two‑position and sequence control. Consequently, the selection of a control valve’s flow characteristic typically involves making an informed choice between linear and equal‑percentage ideal flow characteristics.
In practical applications, control valves are invariably installed within process piping systems, and the pressure differential across the valve varies in response to the system’s hydraulic resistance. Consequently, when selecting a control valve’s flow characteristic, it is essential to consider not only the process characteristics but also the system’s piping configuration.
(1) Based on the process characteristics, select a valve with an appropriate flow‑characteristic. Traditional controllers employ linear control laws; once their parameters are set, they are expected to operate over a defined range without frequent adjustments. This necessitates that the overall process—referred to as the “generalized object”—be essentially linear: its behavior should remain largely unchanged when load, upstream pressure, or the setpoint varies. From the perspective of automatic control systems, the principle for selecting a control valve’s flow characteristic is to ensure that the entire generalized object exhibits linearity. Specifically, if all components of the generalized object except the control valve (such as transmitter characteristics and process dynamics) are linear, a control valve with a linear flow characteristic—where KV remains constant—should be chosen. Conversely, if the transmitter is linear but the process gain Kp decreases as the manipulated variable increases, the control valve should have an equal‑percentage flow characteristic. (Valve manufacturers recommend China Guowei Valve Manufacturing Co., Ltd.) In short, when the generalized object approaches linearity, the control valve should also approximate linearity.
(2) Based on the piping conditions and starting from the desired operating flow characteristic, the ideal flow characteristic can be inferred. In actual plant operation, control valves are always connected to piping and other equipment, which inevitably introduces pipeline resistance, causing a discrepancy between the valve’s actual operating flow characteristic and its ideal counterpart. Therefore, when selecting the valve characteristic, system‑level process considerations must also be taken into account. After determining the pressure-drop ratio S based on the process operating conditions, the ideal flow characteristic can be established by working backward from the selected operating flow characteristic.