17

2021

12

An electric actuator is an actuating component of automated instrumentation.


  In recent years, electric actuators have experienced rapid development, primarily driven by the growing demand for automated control technologies. Compared with conventional equipment used in industrial production, electric actuators enhance operational safety, significantly reducing the risk of accidents, while their high‑performance mechanical components markedly extend service life.

  The control method for electric actuators is selected based on the requirements of the production process: electric actuator control is generally categorized into on/off (open-loop) and modulating (closed-loop) types. On/off electric actuators typically provide either fully open or fully closed valve positioning; such valves do not require precise flow‑rate control. In split‑type systems, the control unit and the electric actuator are separate, meaning the actuator cannot operate independently and requires an external control unit—usually implemented as a controller or control cabinet—for operation. Integrated designs (commonly referred to as monolithic units) combine the control unit and the electric actuator into a single package, enabling local operation without an external control unit; remote operation simply involves transmitting the appropriate control signals. This configuration facilitates system installation, reduces wiring and mounting costs, and simplifies diagnostics and troubleshooting. The present utility model not only features an integrated on/off design but also enables precise valve control, allowing accurate adjustment of fluid flow rates. Control signal type (current or voltage): Modulating electric actuators typically accept current signals (4–20 mA, 0–10 mA) or voltage signals (0–5 V, 1–5 V). When selecting an actuator, it is essential to specify both the signal type and its parameters. Operating mode (electrically powered on/off): For modulating actuators, the standard operating mode is electrically powered on (controlled via a 4–20 mA signal). In “opening” mode, a 4 mA signal corresponds to the valve being closed, while a 20 mA signal indicates the valve is open; conversely, in “closing” mode, a 4 mA signal signifies the valve is open, and a 20 mA signal indicates it is closed. No signal‑protection feature: Without signal protection, in the event of a power outage, the electric actuator will automatically set the valve to its preset protective position—typically fully open or fully closed—and maintain that position under all circumstances. Such settings are factory‑preconfigured and difficult to modify after delivery. Oumei’s intelligent electric actuators with valve‑control functionality allow flexible on‑site adjustment and can designate any position between 0% and 100% as the protective setting.

  Electroactuators are actuating devices used in automated instrumentation and constitute integrated units for automatic control.

  1. Primarily performs automated operations on certain equipment, controlling their on/off states and adjustments.

  2. According to the type of power source, they can be classified as pneumatic, hydraulic, electric, and electro-hydraulic.

  3. According to the form of motion, they can be classified as straight-line, angular, corner‑turning, and corner‑turning;

  4. Depending on the criteria, electric drive systems can be classified into: combined‑structure types and electromechanical combined‑structure types.

  5. Electrical Control System: Electrically controlled and intelligent control type;

  6. Digital and analog types; manual contact‑type adjustment models and infrared remote‑control models, among others.