25
2022
08
Maintenance Procedures for Electric Valve Actuators
Electric actuators for valves are similar to electric devices used in everyday life and should likewise be cleaned and protected to extend their service life. Our staff must ensure that the equipment remains clean, free of obstructions, with all valve components intact, and operating normally throughout the year.
Protection method
1. Smoothness: The trapezoidal threads of valve actuators, the stem nut and rolling elements of the bracket, bearing components, gear and worm‑gear teeth, as well as other mating moving parts, must maintain excellent smoothness to minimize friction and prevent mutual damage. Some components are equipped with oil cups or grease fittings; if these become damaged or lost during operation, they should be replaced or adjusted, and the lubrication passages cleared. Lubricated parts should be periodically greased according to their specific operating environment. For frequently operated valves, high‑temperature actuators are best lubricated once every one to four weeks, whereas low‑temperature actuators may require less frequent lubrication.
2. Protection: For valve‑operated electrical equipment in service, all valves shall be intact and free from defects. The bolts and threads on flanges and supports must be in good condition and show no signs of looseness.
3. Cleaning: The surfaces of valve actuators, the trapezoidal threads on the valve stem and stem nut, the rolling elements of the stem nut and bracket, as well as components such as gears and racks, are prone to accumulating substantial amounts of dust, oil stains, and residual media. Such contaminants can cause damage to and lead to the detachment of parts in the valve actuator. Therefore, the exterior and moving components of the valve actuator should be kept clean at all times to preserve the integrity of its paint finish.
Some actuators do not have an external power supply, so they can be operated manually. However, most actuators are equipped with a visual position indicator that shows whether the electric actuator and the connected valve are open. In addition, many valves incorporate internal switch components or relays to indicate their open or closed position.